Browsing Setting Values - Hitachi 650 Series Operation Manual

Section 5
Using the HMI
1. Select Main menu /Control /Single line diagram .
The single-line diagram view is displayed.
GUID-40BD0177-1CB8-48D6-B149-D25BD109C78F V1 EN-US
Figure 24:
2.
Select an object with
Selection of an object is indicated with a square border that moves when
Switch objects can have additional icons that present the switch object states.
•
•
3.
Press
4. Confirm the control operation in the dialog that opens.
5.
To move between the single-line diagram pages, press
5.1.12

Browsing setting values

1.
Select Main menu/Settings/IED Settings and press
2.
Press
GUID-5196A07A-9DAF-4696-8773-F52ADC155C44 V1 EN-US
Figure 25:
3.
Press
4.
Press
dialog.
5.
Press
•
40
Example of a single-line diagram
or
= Switch object is in substituted state.
= Switch object is interlocked.
to select open or
Select the single-line diagram for the default view in Main menu /Configuration /HMI /
Screen /SCREEN:1 /DefaultScreen .
and then to activate the setting group number selection.
IEC13000241-1-en.vsd
Selecting the setting group number
or to select the setting group number.
to confirm the setting group selection and
to select Yes and to view the setting group values.
Press or to select No and
© 2017 - 2023 Hitachi Energy. All rights reserved
IEC13000244-1-en.vsd
.
to select close the object.
to exit.
1MRK500128-UEN Rev. H
and
or .
GUID-81116DC8-1E66-4144-920F-07C79F1C76B0 v6
.
to return to the Edit setting group
Operation manual
are used.
650 series