Table of Contents
Advertisement
4. Installation Procedure
This manual describes how to install and to turn the power ON Central Station EX.
Follow instructions 1-4 to install Central Station EX.
1. Installation Work
2. Electrical Wiring
3. Configuration
5. Installation Work
5.1
Place for Installation
Choose place that applies to the following:
(1) Refer to
Installation Precautions
"
(2) Place where Central Station EX can be firmly fixed with wood screw on wall mount.
5.2
Installation Procedure
(1) Maintain sufficient space for the installation of Central Station EX as shown below.
10
Start
4. Test Run
(page 4) of this installation manual.
"
372
227.2
100
Refer to "5. Installation Work" (pages 10-12) to perform installation work.
Refer to "6. Electrical Wiring" (pages 13-15) for wiring and switch settings.
Refer to "7. Switch Setting" (pages 16-17) to set IP address before turning
power ON. Changing IP address is not necessary if Central Station EX
are to be operated with factory resetting.*
* Regarding factory default setting, refer to "7. Switch Setting"
(pages 16-17) .
Refer to "9. Setup Procedure Overview" (page 19) for turning power ON to
perform test run.
50
50
100
Unit: mm
50
32.5
27.8
A12124820A
Advertisement
Table of Contents
