Cleaning And Maintenance - EuroLite LED PFE-10 3000K Profile Spot User Manual

Color-filter frame
To insert or replace a color filter, remove the filter frame from the lens tube, as shown below.
Insert the desired color filter and tighten the screw again.
Loosen the
clip

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the light-output
very quickly. The venting slots should be cleaned monthly.
The LED of this device is permanently fixed and may only be serviced by authorized dealers.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards. Should you have further questions, please contact your dealer.
Insertion
of the
color filter
frame
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
CAUTION!
18/20
Tighten the
clip
00101084.DOCX, Version 1.2