Programm Option Button; Select The Prewash Option; Select The Stain Option; Select The Sensitive Option - Electrolux WAG L4 E100 User Manual

Programme option button
Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before depressing button
8
.
When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.
If an incorrect option is selected, the integrated yellow pilot light of button
flashes for 3 times and the Err message appears on the display for some seconds.
Important!
For the compatibility among the washing programmes and the options see
chapter Washing Porgrammes.

Select the Prewash option

Select this option if you wish your laundry to be prewashed at 30°C before the
main wash. The prewash ends with a short spin in programmes for cotton and
synthetic fabrics, whereas in the programmes for delicate fabrics the water is
only drained.
The relevant light will light up.

Select the Stain option

Select this option to treat heavily soiled or stained laundry with stain remover
(extended main wash with time optimised stain action phase). The relevant light
will light up. This option is not available with a temperature lower than 40°C.
Attention! If you wish to perform a programme with the stain option, pour
stain remover into compartment

Select the SENSITIVE option

By depressing this button the washing intensity will be reduced. The machine
adds one rinse in the programmes for Cotton and Synthetics.
This option is recommended for non fast coloureds items.

Select the QUICK option

This option allows you to modify the washing time, automatically proposed by
the washing machine.
By pressing this button, the relative pilot light comes on and the washing
duration will be reduced to wash daily soiled laundry.
On the display will be visualized the decreased washing time. The maximum load
is 7 kg for cottons and 3,5 kg for synthetics and delicates.
.
Use 15
8