Select The Spin Speed, Rinse Hold Or No Spin Option By Pressing Button; Select The Easy Iron Option By Pressing Button; Select The Extra Rinse Option By Pressing Button; Select The Delay Start By Pressing Button - Electrolux EWG 12450 W User Manual

Electrolux washing machine user manual
Hide thumbs Also See for EWG 12450 W:
Table of Contents

Advertisement

Select the spin speed, Rinse Hold
or No Spin option by pressing
button 3
3
Press button
repeatedly to change
the spin speed, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine. The relevant light will light up.
When you select a programme, the
machine automatically proposes the
maximum spin speed provided for the
programme.
Rinse Hold: by selecting this option
the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished the display shows
flashing, the pilot light
8
of button
is off and the door is
locked to indicate that the water must
be emptied out.
To empty the water out, please
read the chapter «At the end of the
programme».
No spin : by selecting this option, all
spinning phases are suppressed and
replaced by a drain, so as not to
wrinkle the laundry.
On some programmes the rinses will
be performed with more water.
Select the Easy Iron option by
pressing button
By selecting this button the laundry is
gently washed and spun to avoid any
creasing. In this way ironing is easier.
Furthermore the machine will perform
some additional rinses for cotton and
synthetics.
In the programmes for cotton the spin
speed is automatically reduced.
0.00
9
is on, the light
4
This function can be used for cotton
and synthetic fabrics.
Select the Extra Rinse option by
pressing button
The machine performs some additional
rinses. This option is recommended for
people who are allergic to detergents,
and in areas where the water is very
soft.
Select the Delay Start by pressing
6
button
Before you start the programme, if you
wish to delay the start, press button
repeatedly, to select the desired delay.
The relevant light will illuminate.
The selected delay time value (up to 20
hours) will appear on the display for a
few seconds, then the duration of the
programme will appear again.
You must select this option after you
have set the programme and before you
8
press button
.
The door will be locked throughout the
delay time. If you wish to add laundry in
the machine during the delay time you
8
will press button
in pause and wait until the pilot light
goes out before opening the door. Add
the laundry, close the door and press
8
the button
again.
You can cancel or modify the delay time
at any moment, before you press
8
button
.
The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of
20 hours by means of this button.
Selecting the delayed start.
• Select the programme and the
required options.
• Select the delay start.
use electrolux 13
5
to put the machine
6
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents