Table of Contents
Advertisement
14
Use
Select the spin speed or the rinse hold option
Press button
be spun at a speed different from the one proposed by the washing machine.
The relevant light will light up.
The maximum spin speed are:
1000 rpm for Model WA 2L E100
1200 rpm for Model WA 4L E100
1400 rpm for Model WA 6L E100
For the maximum speed allowed for each programme, please refer to the chapter
«Washing Programmes».
Rinse Hold (Spülstopp-Anti-Froissage): by selecting this option the water of
the last rinse is not emptied out to prevent the fabrics from creasing. When the
programme has finished the display shows a
on, the Start/Pause light is off and the door is blocked to indicate that the water
must be emptied out.
To empty the water out:
turn the programme selector dial to O
●
select the Drain or Spin programme
●
reduce the spin speed if needed, by means of the relevant button
●
depress button
●
when the programme has finished the display shows a
●
light Door goes off and the door can be opened.
Programme option button
Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before depressing button
7
.
When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.
If an incorrect option is selected, the integrated yellow pilot light of button
flashes for 3 times and the Err message appears on the display for some seconds.
Important!
For the compatibility among the washing programmes and the options see
chapter Washing Porgrammes.
2
repeatedly to change the spin speed, if you want your laundry to
7
0
flashing, the pilot light Door goes
0
flashing. The pilot
7
Advertisement
Table of Contents
