Advertisement
If the temperature of the water inside the machine is above 50°C, you cannot deactivate
the door lock for safety reasons, even if the water level is suitable.
Switching the machine to pause mode:
Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash
on the display.
Changing the programme selection after programme has started:
The programme change is allowed when the current programme is running unless the Child Lock is
enabled. This action will cancel the current programme.
The selected program starts anew.
Changing the auxiliary function, speed and temperature
Depending on the step the programme has reached, you can cancel or activate the auxiliary functions.
See "Auxiliary function selection" You can also change the speed and temperature settings. See
"Speed selection" and "Temperature selection".
The loading door will not open if the water temperature in the machine is high or the
water level is above the loading door baseline.
4.3.13 Cancelling the programme
The programme is cancelled when program selection knob is turned to a different programme or
machine is turned off and on again using the program selection knob.
If you turn the program selection knob when the Child Lock is enabled, the programme
will not be cancelled. You should cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is
not possible to open the loading door since the water level in the machine is above the
loading door baseline, then turn the Programme Selection knob to Pump+Spin
programme and drain the water in the machine.
4.3.14 End of programme
End symbol appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all
indicators are turned off.
Completed programme steps will be displayed if you press On/Off button.
4.3.15 HomeWhiz Feature and Remote Control Function
HomeWhiz allows you to use your smart device to check your washing machine and get information
about its status. With HomeWhiz application you can use your smart device to perform various
procedures that can also be performed on the machine. Plus, you can use some features only with the
HomeWhiz function.
You must download the HomeWhiz application from the app store of your smart device to use the
bluetooth feature of your machine. Make sure that your smart device is connected to internet to install
the app. If you are using the app for the first time, please follow the on-screen instructions to complete
your user account registration. Once the registration procedure is complete, you can use all products
with the HomeWhiz feature in your house on this account.
You can touch "Add/Remove Appliance" HomeWhiz application to see the products paired with your
account.
You can perform user pairing procedures of these products on this page.
Once the application is installed, the HomeWhiz function allows your washing machine to send you
push notifications through your smart device.
24
EN
Advertisement
