Related Manuals for Beko WCV8612XS0ST
Summary of Contents for Beko WCV8612XS0ST
- Page 1 Washing Machine User’s Manual WCV8612XS0ST 2302061403_EN/ 25-04-19.(11:35) Document Number=...
-
Page 2: General Safety Instructions
1 General safety instructions • While there is still water inside the product, never open the This section includes security loading door or remove the filter. instructions which may help prevent Otherwise, risk of flooding and the injuries and material damage risks. injury from hot water will occur. -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used by room where the product is the children who are at the located. age of 8 and over and the •... -
Page 4: Important Instructions For Environment
2. Important instructions for DANGER! environment • Plug the product into a 2.1 Compliance with WEEE Directive grounded outlet protected by This product complies with EU a 16 A fuse. Do not neglect to WEEE Directive (2012/19/EU). This product bears a classification have the grounding installation symbol for waste electrical and made by a qualified electrician. -
Page 5: Technical Specifications
4 Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko WCV8612XS0ST Model name Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) 1.048 Energy consumption of the standard 60°C cotton programme at full load (kWh) -
Page 6: Appropriate Installation Location
4.1 Installation 4.1.3 Removing the transportation locks • Apply to the nearest authorised service agent for the installation of your product. 1 Loosen all bolts with an appropriate wrench until they turn freely. • Preparation of the location and electrical, tap water and waste water installations at 2 Remove the transport safety bolts by the place of installation is under customer's turning them slightly. -
Page 7: Connecting The Drain Hose To The Drain
• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure. •... -
Page 8: Electrical Connection
4.2 Preparation 4.1.7 Electrical connection Connect the product to a grounded outlet 4.2.1 Sorting the laundry protected by a 16 A fuse. Our company shall * Sort laundry according to type of fabric, not be liable for any damages that will arise color, and degree of soiling and allowable when the product is used without grounding in water temperature. -
Page 9: Loading The Laundry
• Operate the product in the highest The detergent drawer capacity allowed by the programme you have selected, but do not overload; see, is composed of three "Programme and consumption table". See, compartments: “Programme and consumption table" – (1) for prewash • Always follow the instructions on the – (2) for main wash detergent packaging. – (3) for softener •... - Page 10 • Do not use amounts exceeding the dosage not use liquid detergent. quantities recommended on the detergent Using gel and tablet detergent package to avoid problems of excessive • If the gel detergent thickness is fluidal and foam, poor rinsing, financial savings and your machine does not contain a special liquid finally, environmental protection.
-
Page 11: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woolens/Silks (Recommended (Recommended (Recommended (Recommended temperature temperature range based temperature range temperature range based range based on on soiling level: cold-40 based on soiling on soiling level: 40-90 oC) soiling level: cold level: cold -30 oC) -40 oC) -
Page 12: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 90° 1200 60° 1000 6 - Auxiliary Function Button 3 40°... -
Page 13: Main Programmes
not selected, superior washing and rinsing • : Selectable performance is ensured for your heavily soiled * : Automatically selected, cannot be cancelled. laundry. ** : Energy Label Programme (EN 60456 Ed.3) • Synthetics ***: If the maximum spin speed of the machine You can use this programme to wash t-shirts, is lower, you can select values up to the syntetic/cotton mix fabrics etc. - Page 14 • Hygiene • Mix 40 Applying a steam step at the beginning of the Use to wash your cotton and synthetic clothes programme allows to soften the dirt easily. Use together without sorting them. this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc.
-
Page 15: Special Programmes
INFORMATION • the automatic stain programme, you can wash 24 types of stains divided into two • Use a lower spin speed for different groups according to quick function delicate laundries. selection. You can see stain groups based on the selection of the quick function. 4.3.8 Temperature selection You can find stain groups based on quick Whenever a new programme is selected, the... - Page 16 • Extra Rinse INFORMATION This function enables the machine to carry out another rinsing cycle in addition to the one • If the programme has not reached carried out after the main wash. Thus, the risk the spin step, you can change for sensitive skins (babies, allergic skins, etc.) the spin speed without switching to be effected by the minimal detergent...
-
Page 17: Starting The Programme
To enable Child Lock: INFORMATION Press and hold the Auxiliary Function button 2 for 3 seconds. While you’re holding the button • If the programme has not started, pressed for 3 seconds, C03, C02 and C01 will you can add laundry into the machine be displayed respectively. - Page 18 4.3.13 Progress of programme 4.3.15 Changing the selections Progress of a running programme can be after programme has started followed from the Programme Follow-up Switching the machine to pause mode indicator. At the beginning of each programme Press the Start/Pause to switch the machine step, the relevant indicator light will turn on.
-
Page 19: Maintenance And Cleaning
4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently experienced problems will be reduced if it is • Depending on the step where the cleaned at regular intervals. programme was canceled in, you may have to add detergent and softener again for 4.4.1 Cleaning the detergent drawer the programme you have selected anew. -
Page 20: Cleaning The Body And Control Panel
4.4.5 Draining remaining water If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick. and cleaning the pump filter The filter system in your machine prevents INFORMATION solid items such as buttons, coins and fabric fibers clogging the pump impeller during •... -
Page 21: Troubleshooting
5 Troubleshooting 3 Follow the below procedures in order to drain water. Program does not start after closing the door. • Start / Pause / Cancel button was not pressed. >>>*Press The product does not have an emergency the Start / Pause / Cancel button. water drain hose, in order to drain the water: •... - Page 22 Machine directly discharges the water it takes in. Machine does not switch to spinning step. (*) • Draining hose might not be at adequate height. • There might be unbalanced load in the machine. >>>Connect the water draining hose as described in the >>>Automatic unbalanced load detection system might operation manual.
- Page 23 Colour of the clothes faded. (**) • There is a problem with the detergent drawer valves. >>>Call the Authorised Service Agent. • Excessive laundry was loaded in. >>>Do not load the • Detergent might be mixed with the softener. >>>Do not machine in excess.
- Page 24 www.beko.com...