Advertisement
Some functions cannot be selected together. If a second auxiliary function conflicting
with the first one is selected before starting the machine, the function selected first will
be canceled and the second auxiliary function selection will remain
active. For example, if you want to select Quick Wash after you have selected the
Additional Water, Additional Water will be canceled and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme
An auxiliary function that is not compatible with the programme cannot be selected.
(See "Programme and consumption table")
Some programmes have auxiliary functions that must be operated simultaneously.
Those functions cannot be cancelled. The frame of the auxiliary function will not be
illuminated, only inner area will be illuminated.
4.3.8.1 Auxiliary functions
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water,
detergent and time.
• Intensive
When this function is selected, the duration of the programs will be longer. Additional time will result in
better cleaning performance, specialized for full capacity of the washing machine with hardest stains on
the clothes.
When you select this function, you can load maximum laundry specified in the program table.
• Steam
Use this function to reduce the creases and ironing time of a small amount of cotton, synthetic or mixed
laundry. This function can be selected on the following cycles (see also Program list on page 13):
Cottons, Synthetics, Daily Xpress/Xpress Super Short, Daily Xpress/Xpress Super Short+ Fast, Down
Wear, Shirts, Mix, DarkWash/ Jeans. This function works better on a small or half load. Vapour is
distributed inside the machine during drum rotation. It is normal that steam vapour may not be visible
during the cycle.
• Remote Control
You can use this auxiliary function key to connect your product to smart devices. For detailed informa-
tion, see 4.3.15 HomeWhiz Feature and Remote Control Function.
• Customized Programme
This auxiliary function can only be used for Cotton and Synthetics programmes together with the
HomeWhiz application. When this auxiliary function is activated, you can add up to 4 auxiliary rinsing
steps to the programme. You can select and use some auxiliary functions even though they are not
found on your product. You can increase and decrease the time of the Cottons and Synthetics
programmes within a safe range.
When the Customized Programme auxiliary function is selected, the washing perfor-
mance and energy consumption will be different than the declared value.
4.3.8.2 Functions/Programmes Selected by Pressing the Function Keys for 3 Seconds
• Drum Clean+
Press and hold the auxiliary function button 1 for 3 seconds to select the programme. Use regularly
(once in every 1-2 months) to clean the drum and provide the required hygiene. Steam is applied before
the programme to soften the residues in the drum.Please note that steam vapour may not be visible
during the cycle. Operate the programme while the machine is completely empty. To obtain better
results, put powder lime-scale remover for washing machines into the detergent compartment no. "2".
When the programme is over, leave the loading door ajar so that the inside of the machine gets dry.
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so,
the machine detects that there is load inside and aborts the programme.
20
EN
Advertisement
