Table of Contents
Advertisement
6. Loosely insert one M5 screw 1 into each rail.
Statement 4
≥18 kg (37 lb)
CAUTION:
Use safe practices when lifting.
7. Slide the storage unit into the rack, and insert the M6 screws 1 . Do not
overtighten the M6 1 screws.
8. Tighten the rear screws 2 .
9. Verify that option switches 1 and 2 (inside the switch card) are set to Off. See
"Setting the interface options and ID settings" on page 11 for more information.
10. Install hard disk drives and power supplies in the storage unit according to
"Chapter 3. Installing and replacing devices" on page 21; then, return here to
complete the installation.
11. Continue with "Completing the installation" on page 16.
≥32 kg (70.5 lb)
Chapter 2. Installing the storage unit
≥55 kg (121.2 lb)
15
Advertisement
Table of Contents
