Transport And Storage; Operation - Trotec BW10 Instructions Manual

Technical data
Parameter
Article number
pH value Measuring
range
Accuracy
Resolution
Temperature Measuring
range
Accuracy
Resolution
Display
Protection type
Operating conditions
Storage conditions
Power supply
Dimensions
Weight
Scope of delivery
• 1 x pH measuring device
• 4 x 1.5 V LR44 batteries
• 1 x pH buffer solution set (4.01/7.00/10.01)
• 1 x Quick guide

Transport and storage

Notice
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
For transporting the device use a suitable bag to protect it from
external influences.
Make sure that the protective cap is attached to the measuring
probe.
Storage
When the device is not being used, observe the following
storage conditions:
• dry and protected from frost and heat
• protected from dust and direct sunlight
• with a cover to protect it from invasive dust if necessary
• the storage temperature complies with the values specified
in the Technical data
• Batteries are removed from the device
EN
Value
3.510.205.810
0.00 pH to 14.00 pH
±0.02 pH
0.01 pH
0 °C to 50 °C / 32 °F to 122 °F
0.2 °C / 2 °F
0.1 °C / 1 °F
LCD
IP65
0 °C to 50 °C / 32 °F to 122 °F
with <85 % RH
10 °C to 25 °C with < 65 % RH
4 x 1.5 V, LR44
188 mm x 38 mm x 38 mm
83 g

Operation

Inserting the batteries
Insert the supplied batteries into the device before first use.
Notice
Make sure that the surface of the device is dry and the
device is switched off.
1. Open the battery compartment by unscrewing the lid (1).
2. Insert the batteries (4 x LR44 button cells) into the battery
compartment with correct polarity.
pH measuring device BW10
1
BW 10
CAL
HOLD
BW 10
5