Description of the device Notes regarding the operating manual ........1 Information about the device........... 1 By use of the moisture measuring device BM12 the humidity level Technical data ................ 2 of wood and building material can be determined. Additionally, the ambient temperature can be measured in °C Safety ..................
Indication of the temperature unit To use the device for its intended use, only use accessories and Indication of the measured temperature value ® spare parts which have been approved by TROTEC Percentage Indication of the measured humidity value Improper use...
For transporting the device use a suitable bag to protect it from external influences. Storage When the device is not being used, observe the following storage conditions: • Dry. • Protected from dust and direct sunlight. Operating manual – Moisture measuring device BM12...
Page 5
Switch-off With activated automatic switch-off function (7) the device switches off after approx. 2 minutes of non-use. • Press the On/Off key (5) for approx. 3 seconds. – The device is switched off. Operating manual – Moisture measuring device BM12...
• If possible, do not measure wood with a temperature below -5 °C. Too low wood temperatures distort the result of the measurement. • Avoid static charge of the material to be measured due to friction. Static charge distorts the measurement result. Operating manual – Moisture measuring device BM12...
Directive 2004/108/EC about electromagnetic compatibility. Herewith, we declare that the moisture measuring device BM12 was developed, constructed and produced in compliance with the named EC directives. marking is found on the rear of the device. Manufacturer: Trotec GmbH & Co. KG Grebbener Straße 7...