Advertisement
Quick Links
Advertisement
Related Manuals for Trotec BW10
Summary of Contents for Trotec BW10
- Page 1 BW10 OPERATING MANUAL PH MEASURING DEVICE...
-
Page 2: Table Of Contents
Follow the manual Information marked with this symbol indicates that the operating manual must be observed. Wear protective equipment Information marked with these symbols indicates that you should wear your personal protective equipment. Operating manual – pH measuring device BW10... -
Page 3: Safety
Trotec accepts no liability for damages resulting from improper Safety use. In such a case, any warranty claims will be voided. Any Read this manual carefully before starting or using the unauthorised modifications, alterations or structural changes to device. Always store the manual in the immediate vicinity the device are forbidden. -
Page 4: Information About The Device
Device depiction Information about the device Device description The pH measuring device BW10 is suited for measuring pH values and temperatures of liquids. With the automatic temperature compensation and the BW 10 automatic calibration functions the measuring device permits a quick and precise determination of the pH value between pH 0... -
Page 5: Transport And Storage
Weight 83 g Scope of delivery • 1 x pH measuring device • 4 x 1.5 V LR44 batteries • 1 x pH buffer solution set (4.01/7.00/10.01) HOLD • 1 x Quick guide Operating manual – pH measuring device BW10... - Page 6 HOLD set. The buffer solutions correspond to the pH values 4 (red), 7 (green) and 10 (blue) with an accuracy of ±0.01 pH (at 25 °C). Operating manual – pH measuring device BW10...
- Page 7 3. Wait until a stable measured value is shown on the measurement value display (10). 4. Press the CAL button (3) for approx. 3 s. ð CAL is displayed in the measurement value display (10). Operating manual – pH measuring device BW10...
- Page 8 2. Press the CAL button (3) to switch between °C and °F. 3. Press the HOLD button (4) to save the setting. ð SA appears on the display. ð The setting is saved and the current measurement result is displayed. Operating manual – pH measuring device BW10...
-
Page 9: Maintenance And Repair
4. Place the new seal ring onto the new measuring electrode. 5. Put the new measuring electrode on the device. In doing so, pay attention to the guide rails and connections. 2. Loosen the screwing at the measuring electrode and slide it downwards. Operating manual – pH measuring device BW10... -
Page 10: Disposal
• Avoid unnecessary friction / contact with the glass ball electrode as it may be damaged or age faster. Repair Do not modify the device or install any spare parts. For repairs or device testing, contact the manufacturer. Operating manual – pH measuring device BW10... - Page 12 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...