Function Block Diagram - Boss Vocal Performer VE-22 Reference Manual

Function block diagram

MIC
INPUT
LOOP
MIC
CHECK
DRY OUT
LEVEL
USB
*1
For DRY Recording Output
DRY OUT
*1 Only supported by the VENDOR driver (VE-22 driver) for Windows and macOS.
Not supported for iOS (GENERIC driver).
DYNAMICS
HARMONY
EFFECT
EQ
SELECT LOOP TYPE: PERFORM/CHECK
R x0.5
L x0.5
USB PARAMETER
INPUT
LEVEL
*1
For Re EFX Input
INPUT
DRY (BYPASS)
MEMORY: U01-U99, P01-P50
MEMORY SETTING
OUT LOOP
VOLUME
ECHO
LEVEL PERFORM
BPM
BPM HOLD
OUTPUT
LEVEL
LOOPBACK
LEVEL
LOOPBACK SW
For EFX Recording Output
OUTPUT
*2 The AUX INPUT and USB for Backing Input are output to both the OUTPUT connectors and PHONES/
LINE OUT jack.
The audio is mixed as follows according to the OUTPUT MODE setting.
OUTPUT MODE AUX and USB for Backing Input are mixed.
MONO The input is converted to mono and output to the L and R outputs respectively.
STEREO The input is output as-is to the L and R outputs.
FX/DRY The input is converted to mono and output to the L (mono) side only.
AUX INPUT *2
OUTPUT
MASTER MODE
LEVEL
PHONES/
LINE
VOLUME
(KNOB)
MIX IN
LEVEL
For Backing Input *2
MIX IN
L/MONO
OUTPUT
R
PHONES/
LINE
28