Important Notes; Block Diagram - Boss BE-5B Owner's Manual

@ IMPORTANT NOTES
e When you make any.connections with other devices, always turn off
the power to all equipment first. This will help in preventing malfunc-
tion, and darnage to speakers.
® Do not force the unit to share the same power outlet as one used for
distortion producing devices (such as motors, variable lighting devices).
Be sure to use a separate power outlet.
® Before using the AC adaptor, always make certain the voltage of the
available power supply conforms to its rating.
e Do not place heavy objects onto, step on, or otherwise risk causing
damage to the power cord.
@ Whenever you disconnect the AC adaptor from the outlet, always
grasp it by the plug, to prevent internal damage to the cord and the
hazard of possible short circuits.
® If the unit not to be used for a long period of time, unplug the cord
from the socket.
e Avoid using or the unit in the following places, as damage could
result.
© Place subject to extremes in temperature. (Such as under direct
sunlight, near heating units, above equipment generating heat, etc.)
© Places near water and moisture. (Baths, washrooms, wet floors,
etc.) Places otherwise subject to high humidity.
© Dusty environments.
© Places where high levels of vibration are produced.
Copyright © 1989 by ROLAND CORPORATION
Alt rights reserved. No part of this publication may be reproduced in .
any form without the permission of ROLAND CORPORATION.
m BLOCK DIAGRAM
QUTPUTA .
PHONES OUTPUTB = (MONO} . RETURN SEND
10 BAND
GRAPHIC
EQUALIZER
EQUALIZER
LEVEL
HEADPHONES
AMPLIFIER
m FEATURES.
The BE-58 is a multiple unit combining five different effects for use
with basses. Settings can be made with ease since there is no need -
for bothering with connections between a number of units.
Offers a great selection of high-quality effects, ranging from a limiter,
essential for bass guitars, to a digital delay equipped with modulation
control.
The averdrive, specialized for use with bass, is provided with a
speaker simulation circuit, so you can obtain a fat, rich bass sound
even when recording straight from the line outputs.
Includes Send/Return jacks so you can easily add on even other
effects or a volume pedal.
A Tuner Output jack provides for connection of a tuner, which you
can use even without changing the connection.
Provided with headphones jack, convenient when practicing alone.
Placing the unit near power amplifier or other equipment containing
large transformers may induce hum.
Should the unit be operated nearby television or radio receivers, TV
pictures may show signs of interference, and static might be heard
on radios. In such cases, move the unit out of proximity with such
devices.
For everyday cleaning, wipe the unit with a soft dry cloth, or one that
is dampened slightly. To remove dirt that is more stubborn, wipe
using a mild, neutral detergent. Afterwards, make sure to wipe
thoroughly with a soft cloth.
Never apply benzene, thinners, alcohol or any like agents, to avoid
the risk of discoloration and deformation.
Protect the unit from strong impact.
Avoid getting any foreign objects (coins, wire, etc.), or liquids (water,
drinks, etc.) into the unit.
Before using the unit in a foreign country, check first with your local
Roland Service Station.
At any time that you notice a malfunciton, or otherwise suspect
there is damage, immediately refrain from using the unit. Then contact
the store where bought, or the nearest Roland Service Station.
TUNER OUT INPUT
—
OVERDRIVE
LIMITER