Maytag MHN30PDBGW Installation Instructions Manual page 13

CODE EXPLANATION CODE EXPLANATION
7. 00 SPECIAL PRICE START HOUR C. 20 VALUE OF COIN 2
NOTE: Uses the 24 hr. clock _ s O _
st C. 20 This represents the value of coin 2 in the quantity
7. 00 This is the start hour; 0-23 hours. Select START of 5% increments of the larger coin value. 20 x
HOUR by pressing the PERM. PRESS button. 5%=100%.
=> Press the DELICATES AND KNITS button once By pressing the PERM. PRESS button, there
to advance to next code. is the option of 1-199 for the quantity of 5%
8. 00 SPECIAL PRICE STOP HOUR increments.
NOTE: Uses the 24 hr. clock C. 05 PN MODELS: This represents the value of coin
. . oe
8. 00 This is the stop hour; 0-23 hours. Select STOP 2 in the quantity of 5% increments of the larger
HOUR by pressing the PERM. PRESS button. con vane Factory default = 5 x 5% of the larger
> Press the DELICATES AND KNITS button once
to advance to next code. > Press the DELICATES AND KNITS button once
to advance to next code.
10__ SPECIAL PRICE DAY d. 00 COIN SLIDE OPTION
10 ~=This represents the day of the week and whether This option is either SELECTED 'ON' or NOT
special pricing is selected for that day. A number SELECTED 'OFF'.
followed by '0' indicates no selection that ; : : :
particular day (9.10). A number followed by an 'S' d. 00 Not Selected OFF'. Used with coin drop or card
indicates selected for that day (9.1S). To change readers.
the value of '0' and 'S', use the QUICK CYCLE Selected 'ON'. Press the QUICK CYCLE button
button. 3 consecutive times for this selection.
Days of the week (1-7) are selected by pressing NOTE: This option needs to be set to "OO" unless
the PERM. PRESS button. the meter case has been changed to accept a
When exiting set-up code '9', the display must coined slide device.
show current day of week: d. CS When coin slide mode is selected 'On', set b.
equal to value of vend price. Set set-up code
DISPLAY _ DAY OF WEEK _ CODE (selected) 6 (regular cycle price) and set-up code 3 (special
_ cycle price) to number of slide pushes. If washer
" bay } _ Monday ae is set up as "CS" and a coin drop is installed, it
_ will not register coins.
<0 bw _ Wednoeday ae NOTE: For coin slide activation, replacement of
50 Day 5 = Thursday 5S the meter case is necessary.
60 Day 6 = Friday 6S = Press the DELICATES AND KNITS button once
70 Day 7 = Saturday 7S to advance to next code.
> Press the DELICATES AND KNITS button once E. 00 ADD COINS OPTION
to advance to next code. This option is either SELECTED 'ON' or NOT
A. 00 VAULT VIEWING OPTION SELECTED 'OFF'. This option causes the
This option is either SELECTED 'ON' or NOT customer display to show the number of coins
SELECTED 'OFF'. (coin 1) to enter, rather than the amount.
A. 00 Not Selected 'OFF'. E. 00 Not Selected 'OFF'.
A. SC Selected 'ON'. Press the QUICK CYCLE button E. AC Selected 'ON'. Press the QUICK CYCLE button
once for this selection. When selected, the money 3 consecutive times for this selection.
and/or cycle counts will be viewable (if counting is > Press the DELICATES AND KNITS button once
selected) when the coin box is removed. to advance to next code.
> Press the DELICATES AND KNITS button once 00 ENHANCED PRICING OPTION
to advance to next code.
b. 05 VALUE OFCOIN 1 ; op an neces OFF. hled. This o p t i o n a l
: jc : ycle-Based pricing enabled. This option allows
b. 05 ~~ This represents the value of coin | in the quantity configuration of different prices for cold, warm,
of 5% increments of the larger coin value. 5 x
5% 05% : and hot water cycles.
7 F. Su Super Cycle pricing enabled. This option allows
By pressing the PERM. PRESS button, there customers to upgrade cycles by depositing
is the option of 1-199 for the quantity of 5% extra money. Set-up codes "H." and "h." will be
increments. displayed only when this option is enabled. Press
With coin slide activation, this represents the total the QUICK CYCLE button once for this selection.
vend price. 8 Press the DELICATES AND KNITS button once
the meter case is necessary. ~ _ teadvance tonext code.
> Press the DELICATES AND KNITS button once
to advance to next code.
13