Preparation And Assembly - Hama 00 220828 Operating Instructions Manual

6. Preparation and assembly

Note
• Never install the bracket alone. Seek assistance and help!
• Different end devices have different connections for cabling and other devices. Before commencing the
installation, check whether the necessary connections can still be reached after mounting.
• Depending on the product and mounting method, you may not need all parts of the mounting kit. It is
therefore possible that unneeded screws and other small parts will be left over even after correct mounting.
Keep these in a safe place together with these operating instructions for use for later reference (sale of the
product, moving house, relocation of the bracket, new TV, etc.).
Warning
• Be aware that the brackets are only suitable for wall mounting.
• Before installation, check that the wall you have chosen is suitable for the weight to be mounted. Also
make sure that there are no electric, water, gas or other lines running through the wall at the mounting
site.
Note - Fischer plugs
The Fischer plugs supplied are approved for the following building materials:
• Concrete
• Plasterboard and gypsum fibreboard
• Vertical perforated brick
• Lightweight concrete hollow block
• Hollow brick and concrete ceilings
• Perforated sand-lime brick
• Solid sand-lime brick
• Natural stone
• Aerated concrete
• Chipboard
• Solid plaster boards
• Lightweight concrete solid block
• Solid brick