6.5 Mounting the cable manager
• First remove the cable manager from the wall bracket.
• Run the cables along the wall bracket arms.
• Attach the preferred cable manager to the arm of the bracket as shown above until you hear it click into
place.
7. Adjustment & maintenance
Note
Never adjust the bracket alone. Seek assistance and help!
Note - tiltable / full-motion brackets
• Ensure that no electrical cables are crushed or damaged during installation or adjustment.
• During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying
capacity is not exceeded.
• Check the strength and operational safety of the bracket and the load attached to it at regular intervals (at
least quarterly).
• Clean only with water or conventional household cleaners.