Hama 00 220828 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Hama Manuals
  4. TV Mount
  5. 00 220828
  6. Operating instructions manual
Hama 00 220828 Operating Instructions Manual

Hama 00 220828 Operating Instructions Manual

Tv wall bracket
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
00
220828
TV WALL BRACKET
G Operating Instructions

Advertisement

Table of Contents
loading

Related Manuals for Hama 00 220828

Summary of Contents for Hama 00 220828

  • Page 1 220828 TV WALL BRACKET G Operating Instructions...

  • Page 2: Table Of Contents

    Contents 1. Explanation of warning symbols and notes ......3 2. Package contents ..........4 3.

  • Page 3: Explanation Of Warning Symbols And Notes

    G Operating Instructions Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, pass on the illustrated quick start guide and the safety instructions in printed form to the new owner.

  • Page 4: Package Contents

    2. Package contents • TV wall bracket • Wall plate cover (3x) • Cable manager (3x) • VESA adapters (4x) • Mounting kit • Safety instructions, illustrated quick start guide Mounting kit 6x55 (x4) M8x20 (x4) Ø8x50 (x4) M8x30 (x4) M6 (x4) M8x50 (x4) M6 (x4)

  • Page 5: Safety Instructions

    4. Safety instructions Warning • Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option. • It occasionally happens that the screws for attaching the device to the bracket are too long. •...

  • Page 6: Preparation And Assembly

    6. Preparation and assembly Note • Never install the bracket alone. Seek assistance and help! • Different end devices have different connections for cabling and other devices. Before commencing the installation, check whether the necessary connections can still be reached after mounting. •...

  • Page 7: Assembly Preparation

    6.1 Assembly preparation • Remove the centre cover from the wall plate.
  • Page 8 • First loosen the two upper flange nuts using the hexagon ring spanner (F3). • In the next step, loosen the lower flange nut as shown above. • Remove the VESA plate from the wall bracket by lifting it up.

  • Page 9: Mounting On The Wall

    6.2 Mounting on the wall 6.2.1 Preparing the intended mounting surface Get support and help from other people for the following assembly steps. 8 mm 60 mm Ø 8 mm • First use the bracket as a template and re-measure if necessary to ensure that the position is correct. Use a spirit level to check the horizontal and vertical alignment of the bracket on the wall.

  • Page 10: Attaching The Wall Bracket

    6.2.2 Attaching the wall bracket A3 A1 8 mm • Attach the wall bracket to the wall as shown above using the enclosed mounting material ([A2] plug, [A3] M6 washer, [A1] 6x55 mm screw). • Then attach the covers to the bracket.

  • Page 11: Mounting On The Tv Set

    6.3 Mounting on the TV set Note • Given the multitude of terminal devices structures available on the market, we cannot describe all possible mounting options here. • Please ensure that the bracket lays flat and evenly on the back of the television. •...

  • Page 12: Vesa Variants 75 X 75, 100 X 100, 200 X 200

    6.3.1 VESA variants 75 x 75, 100 x 100, 200 x 200 6.3.2 VESA variants 300 x 300, 400 x 400 6.3.3 VESA variant 400x200 Mount the supplied adapter plates on the back of the VESA plate using screws [F1].

  • Page 13: Mounting The Vesa Plate On The Back Of The Tv Set

    6.3.4 Mounting the VESA plate on the back of the TV set • Ensure that the VESA plate is correctly aligned. The upper side is the one that is fitted with two flange nuts.
  • Page 14 C1, C2, D1, D2, D3, D4, E1, E2 B2, B3 Flat TV back C1, D1, D4, E1 M8x50 Ø 8x5 M8x45 (D4) Curved TV back C2, D2, D4, E2 D3, D4 You do not need a washer for the D-screws •...

  • Page 15: Mounting The Tv On The Wall Bracket

    6.4 Mounting the TV on the wall bracket Get support and help from other people for the following assembly step. During installation, the joints must be adjusted so that lateral movement of the TV set is possible. • Hang the TV with the mounted VESA plate on the wall bracket as shown above. •...

  • Page 16: Mounting The Cable Manager

    6.5 Mounting the cable manager • First remove the cable manager from the wall bracket. • Run the cables along the wall bracket arms. • Attach the preferred cable manager to the arm of the bracket as shown above until you hear it click into place.

  • Page 17: Setting Options

    8. Setting options 180° 58 - 521 mm -15°/+10° 6° Swivel extendable Tilting Rotating • No screws need to be loosened for the tilt adjustment and sideways movement.

  • Page 18: Technical Data

    9. Technical data Maximum load: 35 kg Screen diagonal: 81.0 - 165.0 cm (US: 32" - 65") Depth: 5.8 cm - 52.1 cm Tilt: -15°/+10° (depending on device) Swivel range: Up to 180° (depending on device) at 3 joints Dimensions of the wall mounting plate: 7.2 x 29.2 cm Compliant with VESA standard: 75 x 75...

  • Page 19: Warranty Disclaimer

    In the event of a warranty claim, please contact us at Hama GmbH & Co KG, Dresdner Str. 9, 86653 Monheim, Germany, enclosing proof of purchase. You are also welcome to contact us at www.hama.de or by phone on...

Table of Contents