ABB Relion 650 Series Commissioning Manual page 15

1MRK 505 289-UUS B
For example, to save the changes in non-volatile memory, select Yes and press
• Parameter names are shown in italics.
For example, the function can be enabled and disabled with the
• Each function block symbol shows the available input/output signal.
•
•
• Dimensions are provided both in inches and mm. If it is not specifically mentioned then the
dimension is in mm.
Busbar protection REB650
Commissioning manual
the character ^ in front of an input/output signal name indicates that the signal name
may be customized using the PCM600 software.
the character * after an input/output signal name indicates that the signal must be
connected to another function block in the application configuration to achieve a valid
application configuration.
© Copyright 2013 ABB. All rights reserved
Introduction
.
Operation setting.
Section 1
9