First Aid - FRIGOGLASS Flex 35 Tall HC User Manual

FAULT
The ICM does not
work.
The cooler does not
cool.
The ICM makes
noise.
There is water on the
floor.
The lights don't
work.
If after all the above-mentioned checks the problem with your ICM remains, contact the customer
service department of your supplier and provide the following information:

Type of ICM

Serial number of the ICM

Brief description of the problem / observation

6. First Aid

In case of accident, proceed to the following:
ACCIDENT
Inhalation of refrigerant
Contact with eyes
Contact with skin
POSSIBLE REASONS
Power cord not plugged in.
No power supply at the socket.
The ICM has recently been reloaded
with warm products. Please note
that it takes some time to cool warm
products.
The ICM is loaded in such a way that
the air circulation in the interior is
getting blocked.
The door does not seal properly.
Leakage in the cooling system.
Intense metallic noise.
Inclined or curved floor.
The drainage hole for the
condensate water is blocked.
There is a leakage in the tray.
The lighting or the transformer are
out of order.
IMMEDIATE ACTION
Take deep breaths of clean air. If irritation persists, contact a
doctor.
Wash your eyes thoroughly with plenty of water for at least 15 minutes
and then consult a doctor.
Wash immediately with water.
HANDLING
Plug it in.
Check the outlet fuse.
Preferably, reload the ICM before night
closing.
Load the ICM according to the
standards you have been provided
with by the company.
Repair the doors for proper closing
(this type of repair should be
performed by an authorized
technician).
Repair the leakage (this type of repair
should be performed by an authorized
technician).
Call a Service technician.
Level the ICM properly by adjusting its
feet. Placing a spirit level on the top of
the ICM will assist you in leveling it.
Unblock the drainage hole.
Call a Service technician.
Call a Service technician.
ENG
6