Disposal Of The Unit And Packaging; Recycling Information - FRIGOGLASS Flex 35 Tall HC User Manual

Table of Contents

Advertisement

ENG

7. Disposal of the unit and packaging

For detailed information regarding the recycling of this product and its packaging, please contact your
local city office, your waste disposal service or the manufacturer through its service agent. By ensuring
this product and its packaging are disposed of properly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise incur by this product's
and packaging inappropriate disposal.
Packaging consists of wooden pallets, cardboard/ plastic parts and stretch film. Cardboard, kraft
paper, plastic parts and films can be disposed for recycling at your curbside collection bins or at your
local recycling facility. Wooden pallets may be reused or disposed for energy recovery.

8. Recycling Information

1.
Based on the objectives of environmental policy according to the European Community (EC)
directives of Waste Electrical and Electronic Equipment (WEEE)
and improve the quality of the environment, protect human health and utilize natural resources
prudently and rationally, as an end user, you are kindly requested to do the following:
If the appliance has stopped working, even after troubleshooting, first check if it can be
repaired, before disposing it. Contact your distributor or supplier for further information on
possible repairs of your appliance, if in doubt.
If the appliance has reached its "End of Lifecycle" (EOL), in other words, the appliance is not
repairable or re-usable, do not dispose of the appliance as unsorted municipal waste. Instead,
ensure that it is collected separately from a recycling company.
Note: The disposal of electronic and electrical appliances in landfill sites or through incineration
creates a number of environmental problems. When obsolete materials are not recycled, raw materials
have to be processed for the production of new products. This represents significant loss of resources
as the energy, transport and environmental damage caused by these processes is considerable.
To help in the recovery and recycling process of this appliance, do not dismantle or break parts
off the appliance prior to collection. By removing parts off the appliance, you can reduce its
recyclability rate.
2.
The symbol shown in Fig. 1 below, which is also on the Product Label inside the appliance,
indicates the need for separate collection of electrical and electronic equipment based on the
European Community (EC) WEEE Directives.
1
References
Waste Electrical and Electronic Equipment (WEEE) European Community (EC) Directive Nr. 2002/96/EC
7
Figure 1 - Crossed-Out Wheeled Bin
1
which aim to preserve, protect

Advertisement

Table of Contents
loading

Table of Contents