Responsibility Matrix; General Specifications - Xerox DocuColor DocuColor 4 Supplementary Manual

Responsibility Matrix

Ensure adequate space and power to install
DocuColor 4 CP system
Unpack system / components
Connect all system components prior to powering up the
system
Connect the DocuColor 4 CP to the Network
Install the client software
Ensure network configuration
Confirm network integrity
Acquire and install client workstation network
hardware and software
Monitor and adjust calibration for color matching of
color management systems
Download any additional fonts to server
Order and replace CRUs
Remove and ship failed components to Xerox
Provide Helpline Support
Provide spared parts
Provide Service

General Specifications

Physical and Environmental
Weight
Operating Temperature
Relative Humidity
Altitude
Electrical Requirements and Compliance
For 100/120V
For 120V
For 220/240 V
Service
Terms and product names used in this document may be trademarks or registered
Trademarks of their respective companies and are hereby acknowledged.
Expectation Setting Document for
DocuColor 4 CP
Action
English Units
294.1 lbs
42º - 90º F
15% to 85% (non-condensing)
0-8200 ft above sea level
100/120V 10% (90-132V)
50/60 Hz 3Hz. (47-63Hz.) single phase
same as above
220/240V 10% (198-264V)
50/60 Hz 3Hz. (47-63Hz.) single phase
15 amp or 20 amp
System Product
Customer
Metric Units
133.4 kg
5º - 32º C
15% to 85% (non-condensing)
0-2500 meters above sea level
Vers. 2.4 dated: 9/29/99 AML, RD
Responsibility
Xerox
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
(5000 meters tested)
2
page