Beko BBIS13300XMPE User Manual page 37

2. Before starting the cleaning, clean the
outer surfaces of the oven and the food
residues inside the oven with soapy
cloth.
3. Select the "pyrolysis" (Pyrolysis) func-
tion.
ð The "P2:00" flashes on the dis-
play. If your appliance is equipped
with the Eco pyrolysis function,
the "Pro" message is displayed
on the display for 2 seconds first,
and then the P2:00 message
starts to flash.
If the "Pro" and then the "ECO"
messages are not shown on the
display, your appliance is not
equipped with the Eco pyrolysis
function.
4. Turn the temperature knob to the
highest "max" (maximum) temperat-
ure.
5. When the pyrolysis function starts,
"P2:00" lights up and starts counting
down. The pyrolysis time (2 hours) is
shown on the display. This time is un-
changeable.
6. When the oven reaches a certain tem-
perature after the pyrolysis process
starts, the symbol appears on the
timer display and the oven door cannot
be opened. Do not force the handle to
unlock the door until the cleaning pro-
cess is finished and the lock symbol
disappears from the display.
7. When the cleaning process is finished,
"End" appears on the display.
8. After "End" appears on the display, turn
the function and temperature knobs to
0 (off) position to end the process.
9. When the symbol disappears on the
display, remove the remaining deposits
with vinegar water.
10.Touch any key to stop the audible
warning.
After the pyrolysis function is com-
pleted, the door lock will be active
until the oven cools to the appro-
priate temperature. If you want to
cook at this time, "H" will appear
on the display and cooking will not
be possible.
Self cleaning function with high temperat-
ure – Eco pyrolysis (It varies depending
on the product model. It may not be
available on your product.)
ü If your oven is not very dirty, we re-
commend using the "Pyrolysis - eco-
nomy mode" function. "Pyrolysis -
economy mode" function takes less
time than the Pyrolysis" function. If the
oven is very dirty, the "Pyrolysis - eco-
nomy mode" function may not be suf-
ficient. In this case, clean it by the
"Pyrolysis" function.
1. Remove all accessories inside the oven.
In the models with wire shelves, re-
member to remove the wire shelf.
2. Before starting the cleaning, clean the
outer surfaces of the oven and the food
residues inside the oven with soapy
cloth.
3. Select the "pyrolysis" (Pyrolysis) func-
tion.
ð The "P2:00" and "Pro" message
is shown on the display for ap-
prox. 2 seconds and then the
P2:00 message starts to flash.
4. Tap the or
ð The "ECO" message is shown on
the display for approx. 2 seconds
and then the P1:30 message
starts to flash.
5. Turn the temperature knob to the
highest "max" (maximum) temperat-
ure.
EN / 37
key.
EN
ES