Table of Contents
Advertisement
Canceling the process
Touch any sensor control.
Resetting settings
Reset the settings if you are disposing
of your cooktop, selling it, or putting a
used cooktop into operation. This is the
only way to ensure that all personal
data has been removed and the previ-
ous owner will no longer be able to ac-
cess the cooktop.
Resetting is not required when replac-
ing the router.
Switch the cooktop on.
Press the 0 sensor control on any nu-
merical display.
Touch the 0 and 9 sensor controls at
the same time for 6 seconds.
The seconds can be seen counting
down in the timer display.
After this time has elapsed, the
code : is displayed in the timer dis-
play for 10 seconds.
Commissioning
37
Advertisement
Table of Contents
