Xerox 2101 Customer Release Notes page 2

• You cannot set any booklet cover options through Command WorkStation
you have the optional Fiery Advanced Controller Interface (FACI) connected to the
Fiery EX2101 Printer Controller, you cannot use Command WorkStation overrides on
the FACI to set any booklet cover options.
• Printing booklets from the following applications is supported:
Microsoft Word, Excel, and PowerPoint from Microsoft Office 2000/XP
Adobe Acrobat 5.0.x and 6.0 (Standard and Professional)
Adobe Acrobat Reader 6.0
When printing from Adobe Acrobat 6.0 (both Standard and Professional) and Adobe
Acrobat Reader 6.0, you must select either Send at Start or Send for Each Page under
Advanced Print Setup to print the job as a booklet. Otherwise, the job may print with
unpredictable results.
T
O PRINT A DOCUMENT AS A BOOKLET WITH A COVER
1. Choose Print in your application.
2. Choose the Fiery EX2101 Printer Controller as your printer and click Properties.
3. Click the Fiery Printing tab.
4. Click the Paper Source print option bar and set the Page Size option to 8.5x11-SEF, A4-SEF,
11x17, A3, 8.5x14, 8.5x13, B4, or SRA3.
If you print from Microsoft Word, you must also select the same page size in the
N :
OTE
Page Setup dialog box.
5. Click the Finishing print option bar and set the Folding option to Half-Fold (inside).
6. Click the Layout print option bar and set the Booklet Maker option to Standard Booklet.
The Xerox 2101 copier must have the Booklet Tray option installed, and the printer driver
must be configured with the Booklet Tray option installed.
7. Set the Booklet Cover Mode option.
Prints a booklet with no cover.
Off:
or
Blank Printed:
Mode and Booklet Back Cover Mode options.
If you select Blank, use the default settings for the Booklet Front Cover Mode and
N :
OTE
Booklet Back Cover Mode options (see the next two steps). Do not set Booklet Front Cover
Mode or Booklet Back Cover Mode to Blank. If you do, an extra blank page may be
inserted after the cover page.
8. Set the Booklet Front Cover Mode option.
Print On Front Only:
The second page of the document is the first page of the booklet's content.
Print On Back Only:
The second page of the document is the first page of the booklet's content.
Prints the first and second pages of the document on the front and back of the
Print Both:
front cover. The third page of the document is the first page of the booklet's content.
Leaves the front cover blank on both sides. The first page of the document is the first
Blank:
page of the booklet's content.
Prints a booklet with a cover as specified by the Booklet Front Cover
Prints the first page of the document on the front of the front cover.
Prints the first page of the document on the back of the front cover.
Page 2
® overrides. If