Xerox 2101 Customer Release Notes page 4

IOT Interrupt
button
Safe Erase
T
O ENABLE
1. With the Fiery EX2101 Printer Controller idle, press the Menu button on the Control Panel.
2. Select Run Setup, and enter the password if prompted.
3. Select Server Setup.
4. Scroll through the options to the Enable Safe Erase option, and select Yes.
5. Scroll through the options to the Save Changes option, and select Yes.
Using the IOT Interrupt button
Pressing the IOT Interrupt button suspends a print job in progress (after the copier has
finished printing its current set of pages) and allows you to use the copier to make copies
manually. After a period of time, the print job resumes. You can program the time period at
the copier. The default time period is 15 seconds.
There is no indication on the Fiery EX2101 Printer Controller that the print job has been
interrupted. The status of the job remains Printing.
You are allowed to specify finishing options, such as stapling, for the copy job, even
N :
OTE
if the print job you interrupt also has finishing options.
Use the IOT Interrupt button with caution. If you encounter an error while you are
copying (such as a paper jam or an out-of-paper condition), the print job cannot be
resumed and you must resubmit it. When you resubmit the job, reduce the number of sets
desired by the number already printed.
If you interrupt a job that has finishing options, such as stapling or folding, and an
N :
OTE
error (such as a paper jam or an out-of-paper condition) occurs on the copier before it
finishes printing its current set of pages, the interrupt light stays on and the copier stops
responding. You must restart the copier. When you resubmit the job, reduce the number of
sets desired by the number already printed.
Enabling Safe Erase
Safe Erase renders files deleted from the Fiery EX2101 Printer Controller permanently
inaccessible. Normally, files that have been deleted from the Fiery EX2101 Printer
Controller can still be recovered. If you enable the Safe Erase option, deleted files are
overwritten to prevent file recovery.
S E
AFE RASE
The Functions menu appears.
If you print a Configuration page, Safe Erase is shown as enabled.
For information about accessing Fiery EX2101 Printer Controller Setup from the Control
Panel, see the Configuration Guide.
Page 4