To continue achieving the best pos-
sible cleaning results, replace the fine
dust filter with a new one after approx.
3 years.
Cleaning the electrobrush/handheld
brush (depending on the model)
Disconnect the electrobrush/hand-
held brush from the vacuum cleaner.
Place the electrobrush/handheld
brush upside down on a level, clean
surface.
28
Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors. To guide
the scissors, there are two guide
tracks on the roller brush.
Then run the vacuum cleaner to va-
cuum up the cut threads and hairs.
If the small running wheels are very
heavily soiled or blocked, you can re-
move them for easier cleaning (not
possible in the case of the handheld
brush). To remove them, use a flat-
head screwdriver.
Removing the roller brush from the
electrobrush
You can take the roller brush out of the
electrobrush in order to remove stub-
born soiling and clean the inside of the
electrobrush.
1
A Turn the arrow on the handle on the
side of the electrobrush to the
symbol.
The roller brush is released.
B Remove the roller brush.
3
2