Cleaning The Electrobrush/Handheld Brush (Depending On Model) - Miele SO 2822 Series Operating Instructions Manual

Cleaning the Electrobrush/handheld
brush (depending on model)
 Disconnect the Electrobrush/
handheld brush from the vacuum
cleaner.
 Place the Electrobrush/handheld
brush upside down on a level, clean
surface.
 Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors. To guide
the scissors, move along the guide
track on the roller brush.
Then run the vacuum cleaner to
vacuum up the cut threads and hairs.
If the small running wheels are very
heavily soiled or blocked, you can
remove them for easier cleaning (not
necessary in the case of the handheld
brush). To remove them, use a flat-
head screwdriver.
Removing the roller brush from the
Electrobrush
(Not possible with the handheld brush)
You can take the roller brush out of the
Electrobrush in order to remove
stubborn soiling and clean the inside of
the Electrobrush.
 Unlock the cover on the side of the
Electrobrush so that the  symbol
becomes visible a.
 Lift the cover up as far as it will go b.
 Remove the roller brush c.
 Remove the roller brush handle if you
identify heavy soiling there d.
35