Connecting The Suction Tube And The Electrobrush; General Battery Information - Miele HS23 Operating Instructions Manual

Cordless vacuum cleaner
Hide thumbs Also See for HS23:
Table of Contents

Advertisement

Connecting the suction tube and the
electrobrush
 Push the suction tube connector into
the electrobrush from above until it
audibly clicks into place.
 Slide the sliding ring on the electro-
brush down to separate the individual
sections from each other.

General battery information

The rechargeable battery is supplied
not fully charged.
Charge the battery completely before
using it for the first time. Allow approx-
imately 3.5 hours for this.
Once the battery is fully charged, the
battery charging state indicator at the
top of the PowerUnit switches off to
conserve energy.
The maximum charging capacity is
only achieved once the battery has
been charged and run down approx.
five times.
A full charge provides enough power for
17 minutes if the vacuum cleaner is
used in its fully assembled state.
However, if you use the PowerUnit solo
(see "Operation" – "Using the
PowerUnit solo"), you can vacuum for
up to 55 minutes at a time.
The running time depends on the se-
lected power level, the flooring and
how the vacuum cleaner is used, as
well as on the degree of soiling of the
filter system.
17

Advertisement

Table of Contents
loading

Table of Contents