Cleaning The Dust Container; Cleaning The Electrobrush/Handheld Brush - Miele SMUL0 Operating Instructions Manual

Cleaning the dust container

Clean the dust container as required.
 Remove the dust container.
 Empty the dust container over a bin
and lift the pre-filter upwards to re-
move it.
 Clean the dust container using water
and mild washing-up liquid.
 Dry the dust container thoroughly.
 Reinsert the pre-filter in the dust con-
tainer and turn the pre-filter back to
its original position.
 Reattach the dust container to the
PowerUnit connector.
Cleaning the Electrobrush/handheld
brush
(The availability of the handheld brush
depends on the model)
 Disconnect the Electrobrush/hand-
held brush from the vacuum cleaner.
 Place the Electrobrush/handheld
brush upside down on a level, clean
surface.
30
 Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors. To guide
the scissors, move along the guide
track on the roller brush.
Then run the vacuum cleaner to va-
cuum up the cut threads and hairs.
If the small running wheels are very
heavily soiled or blocked, you can re-
move them for easier cleaning (not ne-
cessary in the case of the handheld
brush). To remove them, use a flat-
head screwdriver.
Removing the roller brush
(Not possible with the handheld brush)
You can take the roller brush out of the
Electrobrush in order to remove stub-
born soiling and clean the inside of the
Electrobrush.