ADTRAN NetVanta 3000 Series Quick Configuration Manual page 7

Table of Contents

Equipment Required1
Configure the Router2
Connect to the Router (Console Port Connection)2
Set the Enable Command Security Mode Password (Optional)2
Configure the Ethernet Port Parameters3
Configure the Default Gateway3
Configure the Frame Relay Virtual Interface3
Create the PVC and Assign an IP Address4
Configure the Virtual PPP Interface4
Configure the IP Parameters4
Configure the T1 Network Interface4
Create the T1 Interface TDM Group5
Create the Cross-Connect5
Configure the DSX-1 Interface (Optional)5
Configure RIP5
Configure a Telnet Session6
Save the Configuration6
Complete the Installation6