Canon PowerShot A520 Quick Start Manual page 241

Select [All Images] or [Checked Images]
(images checked in the main window) to
~ ~ U ~'r(:I~t
in1i:i9ii!.
apply the common_c_on_v_e_rs_io_n_se_t_ti_n_gs_._ _ ,.;.;.-,;;;,;;-.,_ _.._.- .,
~_ _-_.~
Select a file type
I
r············
Set the file destination
===1'~::j5:::~~
Number of Dtgtts
You can also change the file name
Start Number
4
Click the [2. Save] tab, set the file type
and destination, and then click [Save].
This will convert the image.
5
Click the [3. Exit] tab and click [OK].
RUllclions of the Image Qualil Adiuslmenl¥lilldow
The following adjustments can be made in the Image Quality Adjustment Window. The
available settings may vary depending on the camera used.
This section adjusts the
white balance according
to the light source and
color temperature.
This section adjusts the
digital exposure
compensation, photo
effect, contrast,
sharpness, and saturation.
The effect of the settings
above ca n be vi ewed
immediately if you place
check mark here.
Restores all settings to
settings stored in the
camera at the time of
shooting.
Tone Curve Tab
You can set the levels for
the RGB channels
separately or together.
Advanced Adjustments
Tab
You can set the settings
for adaptive noise
control and the color
space for the output.
Click the arrow to
display the tab.
If you cannot set the
desired setting with the
slider on the left,
directly enter the setting
here.
_ _ _ Applies the settings to
the displayed image
You can change the coloration of the image to your preferred settings when
you convert a RAW image. You can also select preset color schemes, such as
Positive Film. Furthermore, you can add your own color schemes (My Color) to
apply to other RAW images when they are being converted. See the PDF
manual for ImageBrowser for more information (p. 2).