Using An Externally Mounted Flash (Sold Separately) - Canon PowerShot A520 Quick Start Manual

I
Appendix
Using an Externally Mounted
Flash (Sold Separately)
High Power Flash HF-DC1
This is an attachable supplementary flash.
Photographic subjects that are too distant for the
built-in flash to illuminate may be captured using
the High-Power Flash. Affix the High-Power Flash
to the camera using the bracket as shown below.
Please also refer to the user's manual supplied
with the flash.
Tripod
Sockets
Bracket (supplied
with the flash)
136
o
• The High-Power Flash will not fire when the
shooting mode dial is set to M.
• The flash charge time will lengthen as the
battery charge gets weaker. Always set the
power/made switch to [OFF] when you
finish using the flash.
• Be careful not to touch the flash window or
sensor windows with your fingers while the
flash is in use.
• In outdoor settings in the daylight, the flash
may not detect illumination from the
camera's built-in flash and may not fire.
• The flash may fire if another flash is being
used in close proximity.
• The flash may not fire i!there are no
reflective items in its metering field.
• For continuous shooting, although the flash
fires for the first shot, it does not fire for
subsequent shots.
• If the battery usage time has considerably
diminished, wipe the battery terminals well
with a dry cloth as the terminals may be
soiled with oil from one's skin or other dirt.