Xantech 282TP Installation Instructions

Mouse Emitter, Twin Plug
INSTALLATION INSTRUCTIONS
DESCRIPTION
The 282TP "Twin-Plug" Emitter is based on Xantech's
standard 282M Mouse emitter with two 3.5mm Mono-
Mini plugs each with 'diode' isolation. The twin plug feature
allows a single emitter to be shared by two IR sources. For
instance, one mouse emitter can now be connected to both
an IR receiver and a Xantech Multi-Zone Controller without
having to place two emitters on the front of the IR
Controllable component.
Internally, the 282TP contains components that are
designed to keep the IR signal path directed towards the
emitter only, allowing both control systems to be completely
isolated. The plugs are gold plated to increase durability
and connectivity
INSTALLATION
•
Each emitter has a clear adhesive layer on the bottom
flat surface of the shell. The rounded side faces the
user and emits visible light when a command is sent.
•
Simply peel off the adhesive cover and affix the emitter
to the center of the IR sensor window on the controlled
component's front panel.
•
In some cases it may be di
the IR sensor on the component. Consult the owner's
manual of the unit, or the manufacturer, for the exact IR
sensor window location.
•
Double-sided adhesive ta
emitter to a different component, use this tape to
replace the current adhesive layer for the best
adhesion.
•
The shell, th
infrared light, allowing commands from a handheld
remote control to pass through it. This permits direct
control of the equipment from a handheld remote as
well as from the 282TP.
MODEL
282TP
.
ough dark in appearance, is transparent to
fficult to find the location of
pe is included. If you move the
13100 Telfair Ave. 2/F
Sylmar, CA 91342
www.xantech.com