Table of Contents
Advertisement
MDU-0117FXC: 100Mbps Fiber (SC) switching module
4. At rear panel, there are two stack connectors for stacking up to 3 units max.
5. At the front panel of 19" case, one push-bottom switch to setting the
corresponding port as "normal port" or "Up-link port". The "reset" switch is for
reboot the hub.
6. 19" case size design for rack-mount series
7. LED indicators array for simple diagnostics and management
Specifications:
Standard:
IEEE802.3u 100BASE-TX
Network Media:
100BASE-TX – UTP/STP category 5 cable
10BASE-T – UTP/STP category 3 or 5 cable
Connector:
STP RJ-45 ports for 10/100Mbps
1 RJ-45 connector for Up-link port
Stacking ports
LED indicators:
System – power and collision LEDs
Individual port – link/activity and partition LEDs
Dimension:
200mm(W) x 430mm(L) x 44mm(H)
Temperature:
Operating -- 0? to 50?
Storage -- -20? to 70?
Humidity:
Operating – 10% to 90% RH
8
Advertisement
Table of Contents
