Advertisement
Quick Links
Advertisement
Related Manuals for Epiq Solutions Matchstiq Sx
Summary of Contents for Epiq Solutions Matchstiq Sx
- Page 1 Matchstiq™ Sx RF Transceiver • Platform GETTING STARTED GUIDE V1.0.0 - MARCH 23, 2020...
-
Page 2: Change Log
Matchstiq™ Sx | Getting Started Guide CHANGELOG Revision Date Description Author 1.0.0 2020-03-23 initial draft Barry L... - Page 3 Matchstiq™ Sx | Getting Started Guide TABLE OF CONTENTS INTRODUCTION ..................4 PROPER CARE AND HANDLING .
-
Page 4: Proper Care And Handling
PROPER CARE AND HANDLING Each Matchstiq S1x unit is fully tested by Epiq Solutions before shipment, and is guaranteed to be functional at the time it is received by the customer. Improper handling and use of Matchstiq S1x can cause the unit to become non-functional. - Page 5 This interface also supports passive Power over Ethernet, allowing the Matchstiq S1x unit to receive both power and Ethernet connectivity via a CAT5/6 Ethernet cable with the appropriate power injector. Contact Epiq Solutions for details. DC Power Input: This port is used to provide input power to the platform. Input voltages between 8V DC and 42V DC are supported.
- Page 6 64 bytes from 192.168.2.140: icmp_req=4 ttl=64 time=0.405 ms 64 bytes from 192.168.2.140: icmp_req=5 ttl=64 time=0.343 ms --- 192.168.2.140 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 3999ms rtt min/avg/max/mdev = 0.225/0.337/0.405/0.064 ms Epiq Solutions Proprietary Page 6...
- Page 7 ÛÛ ÛÛ ÛÛ ÛÛÛÛÛÛ ÛÛ ÛÛ ÛÛ ÛÛ ÛÛ ÛÛ ÛÛÛÛÛÛÛ ÛÛ ÛÛ ÛÛ ÛÛ ÛÛ ÛÛ ÛÛ ÛÛÛÛ ÛÛÛÛÛÛÛÛ ÛÛ ÛÛ ÛÛÛÛÛÛ ÛÛ === Matchstiq S1x / S2x === === Release 13.1 === root@OpenWrt:~# Epiq Solutions Proprietary Page 7...
- Page 8 <INFO> Loading calibration data for Sidekiq PCIe, card 0 *********************************************************** * libsidekiq v4.12.1 *********************************************************** *********************************************************** * Sidekiq Card 0 Card accelerometer present: true part type: PCIe part info: ES004202-C0-00 serial: ##### xport: PCIe FPGA version: 3.13.0 git hash: 0x06f5a1a9 build date (yymmddhh): 20011315 Epiq Solutions Proprietary Page 8...
- Page 9 INFO: Started era-controller era-ui era-triggeragent services for 'era' Next, open a web browser on the PC or laptop connected to the Matchstiq. In the address bar, enter the address http://A.B.C.D:3000, where A.B.C.D is the IP address of the Matchstiq, default address http://192.168.2.140:3000/ Epiq Solutions Proprietary Page 9...
Need help?
Do you have a question about the Matchstiq Sx and is the answer not in the manual?
Questions and answers