Maintenance-Firmware Upgrade; Maintenance-Load Factory Default - Moxa Technologies MGate 5123 Series User Manual

Maintenance—Firmware Upgrade
Firmware updates for the MGate are available on the Moxa website. After you have downloaded the new
firmware onto your PC, you can use the web console to write it onto your MGate. Select the desired unit
from the list in the web console and click Submit to begin the process.
ATTENTION
DO NOT turn off the MGate power before the firmware upgrade process is completed. The MGate will erase
the old firmware to make room for the new firmware to flash memory. If you power off the MGate and end
the progress, the flash memory will contain corrupted firmware, and the MGate will fail to boot. If this
happens, contact Moxa RMA services.
Maintenance—Load Factory Default
To clear all the settings on the unit, use the Load Factory Default to reset the unit to its initial factory
default values.
ATTENTION
Load Default will completely reset the configuration of the unit, and all the parameters you have saved will
be discarded. Do not use this function unless you are sure you want to completely reset your unit.
MGate 5123 Series User Manual 50