Returning Merchandise For Service - Supermicro SUPERO PDSBA+ User Manual

PDSBA+/PDSBA/PDSBE User's Manual
Question: I installed my microphone correctly but I can't record any sound.
What should I do?
Answer: Go to <Start>, <Programs>, <Accessories>, <Entertainment> and then
<Volume Control>. Under the Properties tab, scroll down the list of devices in the
menu and check the box beside "Microphone".
Question: After I have installed 4 pieces of 1GB Memory, why does the BIOS
only detect about 3.145 GB of memory during POST?
Answer: Because the chipset does not support memory remapping, and PCI-E
memory requires a great deal of memory, so there is a memory hole located around
the 4GB memory address.
Question: I have already enabled the USB Wake-Up mode in the BIOS, my
system still cannot enter "Standby Mode"? Why?
Answer: In order for this function to work properly, please make sure that the USB
Wake-Up Jumpers (JPUSB1/JPUSB2) are also enabled on the motherboard.
3-4

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your
vendor for a Returned Merchandise Authorization (RMA) number. When returning
to the manufacturer, the RMA number should be prominently displayed on the
outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and
handling charges will be applied for all orders that must be mailed when service
is complete.
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor fi rst for any product problems.
3-4