Silvercrest SMA 550 A1 Operating Instructions Manual page 28

Clean the whisks 4/8 in mild soapy water and then rinse them well with
■
clean water.
Clean all exterior surfaces, the plinth 6 and the power cable with a damp
■
cloth. In all cases, dry the appliance well before using it again. For stubborn
soiling use a mild detergent on the cloth. Ensure that there are no detergent
residues located on and in the appliance before taking it back into service.
Storage
■ Let the appliance cool down completely before putting it into storage.
Wrap the power cable around the cable winder 7 under the plinth 6.
■
■ Store the appliance at a dry location.
Troubleshooting
Malfunction
The appliance
does not work.
The milk is not be-
ing frothed.
SMA 550 A1
Cause
The plug is not connected
into the mains power
socket.
The appliance is not
switched on.
The appliance is defective.
The appliance is still too
hot.
The false whisk 8 is fi tted
in the appliance.
Remedy
Connect the plug into a
mains power socket.
Switch the appliance on.
Contact Customer
Services.
Let the appliance cool
down.
Fit the whisk for heating
and frothing 4.
GB
25