Operation - Weelko LUMB 2212.1.A12 Instruction Manual

Operation

Once the table has been unpacked and placed at
the final location, the table is ready for use.
Adjusting the height of the table
The table as standard is equipped with a built-in
switch at the side of the table, under the uphosltery.
Press the rocket switch to move the table up or down.
Keep it press until you reach the disered position then
release the button.
Options for the height adjustment
Ref. HC001 (Hand controller)
Ref. FC001 (Foot controller)
© 2024 Weelko / www.weelko.com / Importer: Weelko Barcelona, S.L. /
Adjusting the backrest
The table is equipped with a level that blocks and un-
blocks the gas lift. Keep the gaslift pressed and move
the backrest at the desired inclination, then release
the lever to keep it fixed.
Wheel system
The metal bar used to lock and unlock the wheels is
placed at both ends of the table base. See image
below.
Simply push the bar downwards and the wheels will
be unlocked . Now you can easily move the table.
To lock the wheels and set the table fix on the floor,
proceed the other way round and release the metal
bar with your foot.
LEVER DOWN= Wheels ACTIVATED and ON
LEVER DOWN= Wheels RETRACTED and OFF.
The table has 4 wheels turning 360º.
The table is not designed for patient transportation.
But they are helpful when moving the table from one
place to another or for cleaning tasks.
ESB65397556
Instruction
Manual
Instruction Manual.
5