Operation - Weelko LATIS Instruction Manual

Operation

Once the table has been unpacked and placed at
the final location, the table is ready for use.
Adjusting the height of the table
The table as standard is equipped with a built-in
switch at the side of the table, under the uphosltery.
Press the rocket switch to move the table up or down.
Keep it press until you reach the disered position then
release the button.
Options for the height adjustment
Ref. HC001 (Hand controller)
Ref. FC001 (Foot controller)
© 2024 Weelko / www.weelko.com / Importer: Weelko Barcelona, S.L. /
Adjusting the backrest
The table is equipped with a level that blocks and un-
blocks the gas lift. Keep the gaslift pressed and move
the backrest at the desired inclination, then release
the lever to keep it fixed.
Wheel system
The 2210A massage table has 2 one-way red wheels
at one end of the table (foot part). In order to move it,
grab the table by the metal structure under the bas-
krest, lift it a bit and move it forward as if it were a
hand truck. Don't walk backwards.
ESB65397556
Instruction
Manual
Instruction Manual.
5