Operation - Weelko TORAC User Manual

Operation

Once the table has been unpacked and placed at
the final location, the table is ready for use.
Adjusting the height of the table
The table is equipped with a built-in metal bar at the
table base. This means that the table can be rised
and lowered from any of the 4 sides of the table. The
bar is designed to be activated with your foot. Relea-
se the switch once the table is at the desired position.
Put your foot underneath the bar and pull it up to lift
the table. Put the foot on the bar and push it down to
lower it.
Adjusting the backrest
The table is equipped with an activating lever under
the backrest. Simply press the lever and mouve the
backrest up or down. Release the lever when the desi-
red position is reached.
© 2024 Weelko / www.weelko.com / Importer: Weelko Barcelona, S.L. /
Wheel system
The metal bar used to lock and unlock the wheels
is placed at the end of the table base. See image
below.
Simply push the bar downwards and the wheels will
be unlocked . Now you can easily move the table.
To lock the wheels and set the table fix on the floor,
proceed the other way round and release the metal
bar with your foot.
LEVER DOWN= Wheels ACTIVATED and ON
LEVER DOWN= Wheels RETRACTED and OFF.
The table has 4 wheels turning 360º.
The table is not designed for patient transportation.
But they are helpful when moving the table from one
place to another or for cleaning tasks.
ESB65397556
Instruction
Manual
Instruction Manual.
5