Product Description; Installation - Weelko LUMB 2212.1.A12 Instruction Manual

Product
description
2-section table of a highly stable structure. Eqquiped
with 1-motor system that allows adjusting height by
means of a button pannel built in the structure. The
backrest inclination is adjusted by gas lift. Headrest
removable cushion with breather hole. Retractable
wheels that allow its simple mobility. PU upholstery of
high quality that eases cleaning. Paper-roll holder in-
cluded.
Unboxing
Open the top of the packaging carefully. Do not
use any sharp-edged items which can damage the
upholstery.
Should the table/bed need to be moved or lifted ( to
take it out from its packaging) then a minimum of 2
people are required. The table must only be lifted by
the metal frame near the wheels.
When you receive the treatment table or bed, make
sure that the packaging contains all the elements ne-
cessary and that there are no missing parts.
The table comes ready to use.
© 2024 Weelko / www.weelko.com / Importer: Weelko Barcelona, S.L. /

Installation

Place the table in the final location. It is not neces-
sary to screw the table to the floor to secure it. The
table design already takes into account its structural
stability. Make sure it is placed on a flat and firm sur-
face to prevent any incidents. If the table wobbles or
moves due to an uneven floor, adjust the 4 leveling
feet and nuts with a hex key (included in the bottom
panel). Level it until it is stable and plug it into the
power source.
ESB65397556
Instruction
Manual
Instruction Manual.
4