Table of Contents
Advertisement
en Cleaning and servicing
Ensure that both impellers can
3.
turn.
Insert the pump cap.
4.
Ensure that the parts of the
‒
pump cap are correctly as-
sembled.
Screw the pump cap as far as it
5.
will go.
The handle on the pump cap must
be in a vertical position.
44
Insert and close the maintenance
6.
flap.
18.4 Cleaning the intake
opening in the rubber
gasket
Regularly check the intake opening
in the rubber gasket for any block-
ages and clean the intake opening.
Open the appliance door.
1.
Remove any blockages from the
2.
intake opening.
Note: Do not use any sharp or poin-
ted objects.
Advertisement
Table of Contents
