Table of Contents
Advertisement
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Basic settings
17 Basic settings
You can configure the basic settings
Basic settings
for your appliance to meet your
needs.
Note: You can also adjust the the ba-
sic settings in the Home Connect
app.
17.1 Overview of the basic
settings
Note: Additional functions may be
available as a result of software up-
dates.
If a software update is available, you
can find further information in the
Home Connect app.
Programme selector with programme
positions
Set the volume of the signal
1
at the end of the programme:
0 (off) to 4 (very loud)
Set the volume of the signal
2
tone emitted when the but-
tons are pressed:
0 (off) to 4 (very loud)
3
5
6
7
17.2 Changing the basic set-
Requirement: The display shows all
additional buttons. → Page 20
To call up the basic settings, press
1.
.
Use the programme selector to se-
2.
lect the required basic setting.
→ Page 39
Adjust the basic setting:
3.
‒
‒
1
Press
2
4.
3
4
5
6
7
Set the display brightness:
1 (low) to 4 (very high)
Activate (On) or deactivate
(OFF) the reminder to clean
the drum.
Display the number of fin-
ished programmes.
Restore the appliance to the
factory settings (rES).
tings
To change the value, press
or
.
To reset the appliance to the
factory settings, press and hold
for approx. 3 seconds.
to save the settings.
Basic settings en
39
Advertisement
Table of Contents
