Page 2
Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, among others, without prior written permission from Axiomtek Co., Ltd.
Most electronic components are sensitive to static electrical charge. Disconnect the power cord from the GOT317B-ADL-TRD prior to any installation. Be sure both the system and the external devices are turned off. Sudden surge of power could ruin sensitive components. Make sure the GOT317B-ADL-TRD is properly grounded.
Table of Contents Disclaimers ..................... ii Safety Precautions ..................iii Section 1 Introduction ..........1 General Description ................1 Specifications ..................2 Dimensions and Outlines ..............4 I/O Outlets .................... 6 Packing List ..................8 Section 2 Hardware and Installation ....10 Open Back Cover ................
Page 5
Operating System ................39 Touch Screen ..................40 APPENDIX A TPM BitLocker SETTINGS ....41...
⚫ Package List General Description The GOT317B-ADL-TRD adopts a 17-inch SXGA TFT LCD with 350-nits brightness, a high performance LGA1700 socket for 13/12 generation Intel® Core™ i7/i5/i3 & Pentium® processor(Tj 100°C) up to 35W,, and an Intel® H610 Express chipset to provide excellent computing performance.
⚫ Designed for extended operating temperature range and ingress protection The GOT317B-ADL-TRD’s compact industrial design and fanless cooling system allow the panel PC to sustain an extended operating temperature range between -10°C and +50°C, makingthe system a power-efficient solution. It also features an IP65 front bezel for protection from liquid and dust.
Page 9
GOT317B-ADL-TRD User’s Manual ⚫ Expansion ➢ 1 x M.2 Key E type 2230 with PCIe x1 and USB 2.0 ➢ 1 x PCI Express Mini Card (USB+PCIe signal) ➢ 3 x Antenna (optional) ⚫ Storage ➢ 1 x 2.5” SATA HDD(WT)/SSD (7mm and 9.5mm height, removable) ⚫...
GOT317B-ADL-TRD User’s Manual Dimensions and Outlines Diagram 1-1 and 1-2 show the outlines and dimensions of GOT317B-ADL-TRD, respectively. Diagram 1-1 Outlines of the GOT317B-ADL-TRD Cut out dimensions: 386.7 x 319 mm Introduction...
Page 11
GOT317B-ADL-TRD User’s Manual Diagram 1-2 Back outline of the GOT317B-ADL-TRD Introduction...
Figure 1-2,1-3 and Table 1-1,1-2 illustrate I/O locations and their functions of the GOT317B-ADL-TRD. Figure 1-2 Side View of the GOT317B-ADL-TRD Table 1-1 Functions of the Side panel of the GOT317B-ADL-TRD Function 1 x Display monitor ON/OFF 1 x Brightness up...
Page 13
GOT317B-ADL-TRD User’s Manual Figure 1-3 Side View of the GOT317B-ADL-TRD Table 1-2 Functions of the I/O Outlets of the GOT317B-ADL-TRD Function Power Button 1 x Phoenix type connector for DC power input Grounding hole Remote power switch 2 x USB 3.2 Gen1 2 x USB 2.0...
GOT317B-ADL-TRD User’s Manual Packing List The package bundled with the GOT317B-ADL-TRD should contain the following items: ⚫ GOT317B-ADL-TRD x 1 ⚫ Panel mount kit x 10 ⚫ Wall mount (optional) ⚫ Phoenix terminal x 1 If any above-mentioned item is missing, please contact an Axiomtek distributor immediately.
Page 15
GOT317B-ADL-TRD User’s Manual This page is intentionally left blank. Introduction...
⚫ Power input Open Back Cover To open the GOT317B-ADL-TRD, simply unscrew the 4 screws on the rear cover and push the cover to the right side as shown in Figure 2-1, 2-2. Step 1 Remove the four screws (see red circles in Figure 2-1) on the back cover.
Figure 2-3: Definitions of pin settings Before applying power to the GOT317B-ADL-TRD series, please make sure the jumpers are in default positions which are defined as follows: NOTE: In case that default jumper setting needs to be changed, please make any change under the power-off condition.
Page 18
GOT317B-ADL-TRD User’s Manual To erase the RTC RAM: Turn OFF the computer and unplug the power cord. Remove the onboard battery. Move the jumper clip from pins 1-2 (default) to pins 2-3. Keep the clip-on pins 2-3 for about 5~10 seconds, then move the clip back to pins 1-2.
GOT317B-ADL-TRD User’s Manual 2.2.5 Ethernet Connector The motherboard supports two Ethernet ports (CN11, CN19): two RJ45 connectors with CN12: Intel® i225-V controller support 10/100/1000/2500Mbps. CN9: Intel® i219-V controller support 10/100/1000 Mbps. LAN Signal LAN Signal Tx+ (Data transmission positive) Tx- (Data transmission negative)
GOT317B-ADL-TRD User’s Manual 2.3.1 Panel Mount Panel mount kit is optional, a set of panel mount kits, including screws and particular hook brackets for panel mounting. Use the panel mount kits to mount the GOT317B-ADL-TRD into a panel. Step 1 Prepare a panel frame to accommodate the panel PC.
Figure 2-3: Screwing the Panel PC firmly to the panel frame. 2.3.2 Wall Mount The GOT317B-ADL-TRD can be mounted onto a wall using the wall mount bracket. Step 1 On the back chassis of the panel PC, locate the screwing holes for assembling the wall mount bracket, as shown in Figure 2-4.
Figure 2-6: Mounting the panel PC on the wall 2.3.3 VESA Mount Alternatively, the GOT317B-ADL-TRD supports VESA arm mount by using a VESA arm kit attached to the back, allowing users to tilt or rotate the panel PC for best visibility. Refer to the following steps when adopting VESA arm mount for the panel PC.
Figure 2-8: Assembling the VESA mount kit to the panel PC 2.3.4 Desktop Mount Desktop mount is used to mount the GOT317B-ADL-TRD on the desk using a desktop stand. After assembling the desktop mount kit to the back of the panel PC, users can mount the unit on the desk.
GOT317B-ADL-TRD User’s Manual Hardware Installation 2.4.1 Installing an SSD The GOT317B-ADL-TRD provides a convenient SSD bracket for users to install 1 x 2.5” SATA SSD. Please follow the steps: Step 1 Refer section 2.1 to open the back cover and push the back cover to the right.
GOT317B-ADL-TRD User’s Manual 2.4.2 DRAM Installation The GOT317B-ADL-TRD provides one 260-pin DDR4 SO-DIMM socket that support system memory up to 32GB. Please follow steps below to install the memory modules: Step 1 Refer to section 2.1 to open the back cover and locate the DIMM socket on the mainboard (MANO561).
GOT317B-ADL-TRD User’s Manual 2.4.3 Wireless LAN Module Installation (optional) The GOT317B-ADL-TRD provides optional wireless LAN module to install. When installing the wireless LAN module, refer to the following instructions and illustration: Step 1 Refer to section 2.1 to open the back cover and locate PCIe Mini-Card slot.
GOT317B-ADL-TRD User’s Manual Power Input The GOT317B-ADL-TRD is equipped with a Phoenix type power connector which supports 12V/19V/24VDC in. Please follow the signs on the power connector to connect to DC power source (see Figure 2-1). Figure 2-10: Power connector -:Power negative...
GOT317B-ADL-TRD User’s Manual Section 3 AMI BIOS Setup Utility The AMI UEFI BIOS provides users with a built-in setup program to modify basic system configuration. All configured parameters are stored in a flash chip to save the setup information whenever the power is turned off. This Section provides users with detailed description about how to set up basic system configuration through the AMI BIOS setup utility.
GOT317B-ADL-TRD User’s Manual Main Menu When you first enter the setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. System Time/Date can be set up as described below.
GOT317B-ADL-TRD User’s Manual Advanced Menu The Advanced menu also allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ►...
Page 31
GOT317B-ADL-TRD User’s Manual ⚫ CPU Configuration This screen shows CPU information. Intel (VMX) Virtualization Technology Enable or disable Intel Virtualization Technology. When enabled, a VMM (Virtual Machine Mode) can utilize the additional hardware capabilities. It allows a platform to run multiple operating systems and applications independently, hence enabling a single computer system to work as several virtual systems.
Page 32
GOT317B-ADL-TRD User’s Manual ⚫ SATA Configuration During system boot up, BIOS automatically detects the presence of SATA devices. In the SATA Configuration menu, you can see all currently installed SATA device(s). SATA Controller(s) Enable or disable the SATA Controller feature.
Page 33
GOT317B-ADL-TRD User’s Manual S3 Video Repost On enabling, Video Option ROM will be dispatched during S3 resume. Restore AC Power Loss Decide the state of system when power is re-applied after a power failure. - Power Off: Keep the power off until the power button is pressed.
Page 34
GOT317B-ADL-TRD User’s Manual ► Serial Port 1 Configuration Serial Port Enable or disable serial port 1. Change Settings Select an optimal setting for Super IO device. Auto IO=3F8h, IRQ=4; IO=3F8h, IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2F8h, IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;...
Page 35
GOT317B-ADL-TRD User’s Manual ⚫ Serial Port 2~4 Configuration Serial Port Enable or disable serial port 2~4. Change Settings Select an optimal setting for Super IO device. For serial port 2: Auto IO=2F8h, IRQ=3; IO=3F8h, IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;...
Page 36
GOT317B-ADL-TRD User’s Manual ⚫ Hardware Monitor This screen monitors hardware health status. This screen displays the temperature of system and CPU, cooling fans speed in RPM and system voltages (VCCIO, CPU SA, +5V and +12V). AMI BIOS Setup Utility...
Page 37
GOT317B-ADL-TRD User’s Manual ⚫ USB Configuration USB Devices Display all detected USB devices AMI BIOS Setup Utility...
Page 38
GOT317B-ADL-TRD User’s Manual ⚫ Network Stack Configuration Network Stack Enable or disable UEFI Network Stack. IPv4/IPv6 PXE Support Enable or disable IPv4 PXE boot support. If disabled, IPv4/IPv6 PXE boot support will not be available. IPv4/IPv6 HTTP Support Enable or disable IPv4/IPv6 HTTP boot support. If disabled, IPv4/IPv6 HTTP boot support will not be available.
GOT317B-ADL-TRD User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: ► PCH-IO Configuration ►...
Page 40
GOT317B-ADL-TRD User’s Manual ⚫ PCH-IO Configuration This screen allows you to set PCH parameters. HD Audio Control detection of the HD Audio device. Disabled: HDA will be unconditionally disabled. Enabled: HDA will be unconditionally enabled. Auto: HDA will be enabled if present, disabled otherwise.
Page 41
GOT317B-ADL-TRD User’s Manual ⚫ Onboard Device Onboard LAN 1/2 Enable or disable onboard LAN 1/2. AMI BIOS Setup Utility...
GOT317B-ADL-TRD User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Full Screen Logo Display. Enable or disable full screen logo display feature.
GOT317B-ADL-TRD User’s Manual Security Menu The Security menu allows users to change the security settings for the system. Administrator Password Set administrator password. User Password Set user password. AMI BIOS Setup Utility...
GOT317B-ADL-TRD User’s Manual Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or fail-safe default values. Discard Changes and Exit Exit system setup without saving any changes. Save Changes and Reset Reset the system after saving the changes.
Section 4 Drivers Installation Operating System GOT317B-ADL-TRD is compatible with operating systems Windows 11 and Windows 11 IoT Enterprise. To facilitate the installation of system drivers, please carefully read the instructions in this section before any of such installation. 4.1.1 Driver download Please download the GOT317B-ADL-TRD driver from Axiomtek’s official website...
Page 46
GOT317B-ADL-TRD User’s Manual Touch Screen The GOT317B-ADL-TRD adopts 5-wire Analog Resistive type screen of which specifications are listed below. Users should install the touch driver for calibration to allow the user to operate the touch panel using single-ginger touch functions on the Windows 11 and Windows11 IoT Enterprise environments.
Page 47
GOT317B-ADL-TRD User’s Manual APPENDIX A TPM BitLocker SETTINGS 1. Setup BitLocker Drive Encryption main storage. Press <Win + R> and type “Control Panel”, then select BitLocker Drive Encryption. TPM Setting...
Page 48
GOT317B-ADL-TRD User’s Manual 2. Insert an external storage device, for example USB Storage. Back up BitLocker recovery key in a new file and save it to the USB Storage. TPM Settings...
Page 49
GOT317B-ADL-TRD User’s Manual 3. Please follow the steps below to encrypt your storage device: TPM Setting...
Page 50
GOT317B-ADL-TRD User’s Manual Now, the system prompts that the operating system drive encryption is in progress, and the encryption progress is checked. TPM Settings...
Page 51
GOT317B-ADL-TRD User’s Manual Select and click the icon in the lower right corner to complete the encryption. TPM Setting...
Page 52
GOT317B-ADL-TRD User’s Manual 4. Confirm the completion of encryption. TPM Settings...
Page 53
GOT317B-ADL-TRD User’s Manual 5. Disable TPM function in BIOS Setup Utility. 6. When the system is powered on and you see the following screen, it means the TPM module function is working fine. Note that BitLocker cannot be executed if your system does not have TPM function.
Page 54
GOT317B-ADL-TRD User’s Manual NOTE: System with no TPM function support is as below: TPM information is not found in Device Manager. When trying to turn on Bitlocker, the following error message shows up. TPM Settings...
Need help?
Do you have a question about the GOT317B-ADL-TRD and is the answer not in the manual?
Questions and answers