Husqvarna 330iKP Operator's Manual page 21

Maintenance
Make sure that the battery charger is
not damaged.
Examine all cables, couplings and
connections. Make sure that there is
no damage or dirt.
Clean the saw chain cover.
Do a check of the connections be-
tween the battery and the product.
Do a check of the connection be-
tween the battery and the battery
charger.
Make sure that the saw head is not
damaged. Replace the saw head if it
is damaged.
Examine the wear of the chain drive
sprocket.
To examine the battery and the
battery charger
1. Examine the battery for damages, for
example cracks.
2. Examine the battery charger for damages,
for example cracks.
3. Make sure that the connection cord of the
battery charger is not damaged and that
there are no cracks in it.
To perform maintenance on the
attachment
To check the saw chain
Do a check of the saw chain daily.
1. Make sure that there are no cracks in
rivets and links.
2. Examine if the saw chain is rigid.
3. Compare the saw chain with a new saw
chain to examine if the rivets and links are
worn.
2113 - 004 - 03.11.2023
Daily
X
An approved Husqvarna dealer must do all servicing on
Replace the chain drive sprocket after approximately
100 hours of operation or more frequently if it is neces-
4. Replace the saw chain if it exhibits any of
the conditions above.
5. Replace the saw chain when the length of
the cutting teeth has worn down to only
0.16 in. (4 mm).
To examine the chain drive sprocket
1. Regularly do a check of the degree of wear
on the chain drive sprocket.
2. Replace the chain drive sprocket if it is
worn and moves from side to side on the
motor axle.
Weekly
X
X
the saw head.
sary.
Monthly
X
21