Husqvarna 330iKP Operator's Manual page 17

8. Make sure the handle and safety features
are in order. Never use a machine that has
any parts missing or has been modified in
relation to the specification.
To connect the battery charger
WARNING:
charger in ambient temperatures
between 41°F (5°C) and 104°F
(40°C).
1. Connect the battery charger to the voltage
and frequency that is specified on the
rating plate.
2. Put the plug in a grounded power outlet.
The LED on the battery charger flashes
red 1 time and green 1 time.
To charge the battery
CAUTION:
battery, the battery charger and the
terminals on the battery are clean
and dry. Do not put the battery in
the battery charger if it is dirty or
wet.
1. Connect the battery charger to a power
outlet. The charging LED flashes red 1
time and green 1 time.
CAUTION:
battery charger to a power outlet
with the voltage and frequency
specified on the rating plate.
2. Connect the battery to the battery charger.
The charging LED comes on.
3. Remove the battery from the battery
charger when it is fully charged. Push the
battery indicator button for battery status.
When all the LED indicators come on, the
battery is fully charged.
4. Pull the power plug to disconnect the
battery charger from the power outlet. Do
not pull the power cord.
To connect the battery to the product
WARNING:
original batteries with the product.
1. Make sure that the battery is fully charged.
2113 - 004 - 03.11.2023
Only use the battery
Make sure that the
Only connect the
Only use Husqvarna
2. Push the battery into the battery holder of
the product. The battery locks into position
when you hear a click.
CAUTION:
does not move easily into the
battery holder, the battery is
not installed correctly. This can
cause damage to the product.
3. Make sure that the battery is installed
correctly.
Battery information
Refer to the operator's manual of the battery
for information about how to use the battery.
To start the product
1. Put the product in the start position.
2. Push and hold the power button until the
green LED comes on.
3. Use the power trigger to control the speed.
Speed mode function
You can use the product in 3 speed modes.
• Eco mode: On the speed mode display
1 LED comes on when you operate the
product. Use the eco mode for easier tasks
and to extend the battery life.
• Normal mode: On the speed mode display
2 LEDs come on when you operate the
product. Normal mode is applicable for
If the battery
17