Table of Contents
Advertisement
5-14. Viewing the Monitor Information
View information related to the input signals that are currently displayed and the monitor.
Procedure
1. Select "Information" from the Setting menu, then select
Input signal information, model name, serial number, firmware version, and usage time are displayed.
The asset tag number is only displayed when it has been set using RadiCS / RadiCS LE.
Attention
• The usage time may not be "0" at the time of your purchase because inspections and other processes had
been carried out on the monitor before it was shipped from the factory.
5-15. Resetting to Defaults
There are two different reset functions: One that only resets the color adjustments to default settings, and
the other that resets all settings to defaults.
Attention
• The previous settings cannot be recovered after they were reset to defaults.
Note
• For information about default settings, see
●
Resetting the color adjustment value
Only the adjustment value for the currently selected mode is reset to the default setting.
Procedure
1. Select "CAL Switch Mode" from the Setting menu, then select
2. Select "Reset", then
3. Select "OK", then
The color adjustment value reverts to the default setting.
●
Resetting all settings
Restore all settings to their default values (except for "Input" and "Administrator Settings").
Procedure
1. Select "Preferences" from the Setting menu, then select
2. Select "Monitor Reset" for "Preferences", then select
3. Select "OK" using
All settings except for "Input" and "Administrator Settings" are reset to defaults.
Example:
"7-3. Main Default Settings" (page
.
.
, then select
or
.
34).
.
.
.
.
Chapter 5 Configuring Monitor Settings
27
Advertisement
Table of Contents
